Water vapour fireplace in a media wall: dimensions, depth and ventilation

2 October 2026

A water vapour fireplace in a media wall is one of the nicest ways to bring a fireplace into a modern living room. Because there is no real fire, you do not need a chimney or flue, and the fireplace can go anywhere in the wall. You do need to include it from the very first design, though. The built-in depth, the weight, the ventilation and access all determine how the wall is built. In this article we set out the dimensions and the points to watch.

Why a water vapour fireplace works so well in a media wall

A media wall (cinewall) is a complete wall with a TV, storage and often a fireplace, built as a single unit. With a gas fire, that means running a flue through the wall and allowing for heat. With a water vapour fireplace, none of that applies. A vaporiser creates a fine water vapour, which is lit by LEDs to produce a lively flame effect. The flame is cool and there is no smoke or soot. That leaves you free to place the fireplace wherever you like in the wall: below the TV, beside it or as a see-through into another room.

Is the fireplace going directly below the TV? Then also read our article on a water vapour fireplace below the TV.

Which model should you choose for a media wall?

Mistero: the built-in unit for bespoke work

The Mistero is the standalone Magic-Fire unit. Your joiner builds the recess and the surround. That gives you the most freedom in materials and look, and the wall does not have to be very deep.

  • Height: 36 cm
  • Depth: 32.5 cm
  • Widths: 51.5 cm (500), 102.3 cm (1000), 153.4 cm (1500) and 205.4 cm (2000)
  • Weight: from 13.5 kg to 54 kg

The top plate is brushed stainless steel and the housing is powder-coated steel.

Incanto: the complete built-in fireplace

The Incanto is a complete fireplace with a housing and back panel in black powder-coated steel, with the Mistero as its ‘burner’. You build it into the wall and the fireplace itself is already finished. That makes the job simpler for your joiner, but the wall does get deeper.

  • Height: 63 cm
  • Depth: 47 cm, or 55 cm for the see-through version (ST)
  • Widths: 120 cm (1000), 170 cm (1500), 220 cm (2000) and 270 cm (2500)
  • Weight: from 55 kg to 137.5 kg

The Incanto is available with a slim 10 mm trim, a 50 mm trim or no trim at all. Without a trim the wall runs cleanly right up to the fireplace, which often gives the best result in a minimalist media wall.

What to consider when designing the wall

1. Depth of the wall

The built-in depth of the fireplace is your starting point. With a Mistero you need at least 32.5 cm, with an Incanto 47 cm. Add the wall construction and a little clearance on top of that. If you want a slim wall, the Mistero is the obvious choice.

2. Weight and supporting structure

A wide Incanto is heavy: the 2000 weighs 110 kg and the 2500 as much as 137.5 kg. The structure of the media wall has to carry that weight, along with the TV and any cabinets. Give the weight of your chosen fireplace to your joiner so the frame can be designed for it.

3. Ventilation

A water vapour fireplace in a closed wall needs ventilation openings. The minimum ventilation per model:

  • 500: 210 cm²
  • 1000: 420 cm²
  • 1500: 630 cm²
  • 2000: 840 cm²
  • 2500 (Incanto): 1050 cm²

In a media wall you can hide these openings neatly, for example in a slot below or above the fireplace or in the cabinet next to it. Do draw them in from the start.

4. Access for water and maintenance

Each module has a 2 litre water reservoir. The reservoirs need topping up, and we recommend cleaning the water tanks, the reservoir, the lid, the tank cap and the air filters once every two weeks. In a media wall, that means you need a hatch, drawer or removable panel so you can reach the fireplace.

The Mistero and Incanto are available with a manual or automatic fill system. For a fireplace built into a complete wall, the automatic fill system is worth considering, because you will need to get to the fireplace less often.

5. Power and cables

The fireplace runs on 220 to 240 volts. Power consumption ranges from 240 W for a 500 to around 1100 to 1200 W for an Incanto 2500. A media wall brings together the TV, soundbar, media player and fireplace. So plan the power supply and cable ducts in one go, and nothing will need opening up later.

A see-through fireplace in a media wall as a room divider

Does the media wall stand between two rooms, for example between the living room and dining room? Then you can choose the Incanto ST. This is a see-through fireplace that lets you see the flame effect from both sides. Allow for the greater depth of 55 cm and for access from one of the two sides.

Flame colour and atmosphere

All models are available with the standard flame colour and as Multi Colour. With Multi Colour you can change the colour of the flame effect. In a media wall that can be a nice touch if the fireplace also needs to suit film nights or the lighting in the wall. If you want a classic fire look, the standard version is all you need.

Frequently asked questions

Do I need a flue for a water vapour fireplace in a media wall?
No. There is no combustion, so a chimney or flue is not needed.

How deep does a media wall need to be for a water vapour fireplace?
At least 32.5 cm built-in depth for a Mistero, 47 cm for an Incanto and 55 cm for an Incanto ST. Add the wall construction on top of that.

What width of fireplace suits my media wall?
That depends on the width of the wall and the TV. The Mistero comes in widths from 51.5 cm to 205.4 cm, the Incanto from 120 cm to 270 cm.

Does a media wall with a water vapour fireplace need ventilation?
Yes. Each model has a minimum ventilation requirement, from 210 cm² for a 500 to 1050 cm² for an Incanto 2500.

Can I still get to the fireplace later for maintenance?
Only if you allow for it in the design. Plan a hatch or removable panel so you can fill and clean the reservoir.

Having your media wall with water vapour fireplace designed

Are you working with a joiner or architect on a media wall? Then include the fireplace from the very first sketch. We supply the dimensions, weight and ventilation requirements of your chosen model, so the wall is built right first time. View all Magic-Fire water vapour fireplaces or see the flame effect for real in our showroom in Haaksbergen. Already have a drawing? Get in touch with us and we will help you choose the right model and size.