How does a water vapour fireplace work?
A water vapour fireplace uses a vaporiser to turn water into a very fine, cold mist and lights that mist with LEDs. The result is a realistic, lively flame effect without real fire, smoke or heat. You fill a water tank or connect the fireplace to the mains water supply, plug it in and the flame effect is there straight away.
How is the flame created in a water vapour fireplace?
The flame is actually illuminated water vapour. A vaporiser inside the fireplace, usually based on ultrasonic technology, turns the water into an extremely fine mist. That mist rises and is lit from below by LEDs. The interplay of moving vapour and light creates a three-dimensional flame effect that is hard to tell apart from real fire.
Because nothing is burning, the vapour stays cold and safe to touch. There is no smoke, no soot and no heat, and you don’t need a chimney.
Where does the water come from?
There are two ways to supply the fireplace with water: a tank that you top up yourself, or a connection to the mains water supply. Consumption is low, just 0.1 to 0.15 litres per hour. You use tap water, and these days distilled water works too.
Single-color or multi-color: the colour of the flame
Safretti water vapour fireplaces come with LED lighting as standard and are available in two versions:
- Single-color. A single-colour LED strip for a classic, warm flame effect.
- Multi-color. A multicoloured LED strip that lets you opt for a multicoloured flame effect in, for example, green, blue or red.
Control via the Flame Connect app
The multi-color fireplaces come with the Flame Connect app. It lets you control the fireplace from your phone and adjust the flame effect to suit you. The app is available for the multi-color models.
Which water vapour fireplaces are available?
Safretti offers three models, each suited to a different type of installation:
- Mistero. A built-in burner that can be installed as a see-through model or with a closed back panel.
- Incanto. The Mistero burner fitted in a complete steel housing, so the fireplace can easily be built into a wall.
- Sogno. A ready-to-use wall-mounted model that you simply fix to the wall.
What does a water vapour fireplace need to work?
A water vapour fireplace runs on electricity, from 240 watts depending on the model, and water. You don’t need a gas connection, chimney or flue, which keeps installation simple. The fireplaces are CE certified and alert you when the water is low, with two flashes and a beep. For reliable operation, Safretti recommends cleaning the water reservoir, the small tanks, the lid, the tank cap and the air filters once every two weeks, especially in hard water areas.
Frequently asked questions
How does a water vapour fireplace work? A vaporiser turns water into a fine, cold mist, which is lit by LEDs. This creates a realistic flame effect without real fire.
So there is really no fire? That’s right. It is illuminated water vapour, so it is cold and safe to touch, with no combustion.
Does a water vapour fireplace need a water connection? Not necessarily. You can top up a water tank or connect the fireplace to the mains water supply.
Can you change the colour of the flame? With the multi-color version, yes, via the Flame Connect app. The single-color version has a single-colour flame effect.
Does a water vapour fireplace give off heat? No. A water vapour fireplace is designed for atmosphere and does not give off any heat.
Realism without real fire
A Safretti water vapour fireplace combines clever technology with a surprisingly realistic result: a lively flame effect made from nothing more than water and light. Whether you choose the Mistero, the Incanto or the Sogno, you create atmosphere without fire, smoke or a chimney. Take a look at the full range of Safretti water vapour fireplaces or contact us for personal advice.